Car maintenance isn’t just about changing the oil—car owners should know “this one thing” to save a lot on repair costs!

Release date:

2022-04-25

Author:

Source:


Abstract

Everyone who buys a car knows that after driving it for a while, regular maintenance is essential. Yet many people still aren’t sure what kind of maintenance is truly correct. When new owners take delivery of their vehicles, salespeople often advise them to change the engine oil once the car reaches a certain mileage. As a result, many assume that changing the oil alone suffices for vehicle upkeep. In reality, proper maintenance requires more than just oil changes. Relying solely on one fixed method to care for the engine isn’t enough, since oil changes only provide lubrication; if the oil becomes excessively dirty, it can negatively affect the engine’s performance. Beyond oil changes, it’s important to replace the oil filter regularly—ideally, with every oil change. This ensures optimal protection and efficiency. When selecting engine oil, choose the type best suited to your vehicle; don’t assume that more expensive oils are automatically better or that any oil will do. There are various types of motor oil available—mineral-based, conventional, fully synthetic, semi-synthetic, and others—so pick the one that matches your car’s needs. When replacing the oil filter, always opt for a paper‑based filter, as it offers superior filtration. However, during normal use, cars encounter challenges: frequent gear shifts and varying engine conditions can reduce fuel combustion efficiency, leading to the buildup of impurities inside the engine. At this point, a crucial maintenance task becomes necessary—cleaning internal components. Neglecting this cleaning process over time can cause significant deposits to accumulate. These residues, commonly known as carbon buildup, not only wear down the engine but also restrict its operation, resulting in jerky acceleration and increased fuel consumption. Therefore, if you notice these issues while driving, addressing carbon buildup promptly is vital. Most drivers rely on “injector flushing” or similar methods to remove carbon deposits—a technique frequently used by experienced motorists. While such treatments performed at authorized service centers may seem reliable, their effectiveness is often limited. Compared to disassembling parts, injector flushing is considered a safer approach, yet the cleaning agents used typically fail to fully dissolve deeply embedded carbon deposits. These agents can only soften relatively mild buildup; attempting to tackle severe carbon deposits this way is essentially a waste of money. If the carbon buildup damages the engine, it could lead to premature failure and costly repairs. Thus, when seeking solutions, avoid rushing into hasty decisions or blindly applying any method without careful consideration. Rushing could worsen the problem, leaving you regretting your choice later. If your car has been plagued by persistent carbon buildup, or if you’ve already spent considerable money on ineffective treatments, consider trying the following approach. This method has long been favored by industry professionals—and even seasoned drivers agree it can restore your car’s performance after just one application. After all, maintaining your vehicle starts with effectively managing carbon deposits. By consistently using this method, your car can regain the smooth handling, fuel efficiency, and trouble-free operation of a brand-new vehicle.

Everyone who buys a car knows that after a while, regular maintenance is essential. Yet many people still aren’t sure what kind of maintenance is truly correct. When new owners take delivery of their vehicles, salespeople often tell them to change the oil once the car reaches a certain mileage. As a result, many assume that oil changes are all that’s needed for proper care. In reality, vehicle maintenance requires more than just routine oil changes. Relying on a single, one‑size‑fits‑all approach to engine care simply won’t do, because changing the oil alone only provides basic lubrication; if the oil becomes too dirty, it can still impair the engine’s performance. Beyond oil changes, it’s important to replace the oil filter regularly—ideally, with every oil change. This ensures optimal protection. And when you do change the oil, be sure to use the type that’s right for your vehicle. Don’t assume that the most expensive oil is always the best, nor should you automatically pour in any oil you come across. There are different kinds of motor oil: mineral‑based, conventional, fully synthetic, and semi‑synthetic, among others. Choose the oil that best suits your car’s needs.

However, when replacing the oil filter, it’s essential to choose a paper‑type filter, as this ensures thorough filtration of the oil. That said, cars can encounter certain issues during use: frequent gear changes and varying engine operating conditions can reduce the efficiency of gasoline combustion, leading to an accumulation of impurities inside the vehicle. At such times, a maintenance task—cleaning the relevant components—is required.

 

This maintenance must not be neglected. If you consistently skip cleaning the engine components, a significant buildup of contaminants will occur. The resulting deposits—commonly known as carbon buildup—can wear down the engine, impair its performance, cause jerky acceleration, and increase fuel consumption.

So when a car is driving on the road, if any issues arise, it’s even more important to address carbon buildup promptly. However, most drivers opt for the “IV drip” method to remove carbon deposits—something many seasoned motorists frequently use. While this approach is quite reliable at authorized 4S dealerships, its effectiveness is limited. Compared with disassembling components, the IV‑drip method is one of the safest ways to tackle carbon buildup, but the cleaning agents in the solution can’t fully soften the carbon deposits inside the engine.

 

Because the cleaning agent in the IV bag can only soften carbon deposits that aren’t too severe, using this method to tackle excessive buildup is simply a waste of money. And if the carbon deposits inside the engine end up causing wear, your car could be written off prematurely. So when looking for a solution, don’t rush or apply just any remedy to your vehicle—otherwise, if the problem worsens, you may regret it deeply.

If your car has been plagued by carbon buildup for a long time, or if you’ve already spent a lot of money on carbon‑removal services without much success, why not give this method a try? It’s a technique that many industry professionals rely on—so much so that even seasoned drivers swear it can restore your car’s performance after just one use. In fact, the key to proper vehicle maintenance is regularly cleaning out carbon deposits. With consistent application of this approach, your car will run as smoothly and efficiently as a brand‑new model—fuel‑efficient, easy to drive, and virtually trouble‑free!

Related industries


Liaoning Qizhong New Energy Technology Co., Ltd.


Qizhong New Energy Company is a subsidiary of Qizhong Group. The company conducts independent research and development in cutting-edge technologies such as new materials, emerging energy sources, and resource recycling, establishing a robust R&D system that seamlessly integrates proprietary formulation expertise with applied experimental studies. This enables the company to meet the needs of domestic and international customers, support the stable growth of the industry, and accelerate the industrialization of new energy. Looking ahead, amid an increasingly complex and dynamic global market landscape, Qizhong New Energy will remain committed to its two core strategic pillars—brand building and independent innovation—while continuing to collaborate with research institutions and academic partners to broaden the application of its innovative breakthroughs.

2023-04-24

Kali Chain Enterprise Management Co., Ltd.


Shenyang Kailin Chain Enterprise Management Co., Ltd. is affiliated with Qizhong Group. Its flagship brand, Kailin Lubricant Professional Quick‑Change Chain Stores, is a specialized automotive service chain that integrates oil changes and maintenance, car washing and detailing, as well as vehicle inspection and quick repairs.

2021-04-12

Canada Seven O’Clock Engineering Company


In 2016, Seven O’Clock Engineering Canada was founded in Toronto, Canada, offering services in design, site investigation, consulting and supervision, cost estimation, and engineering‑procurement‑construction (EPC) for the oil and gas, chemical, and petrochemical industries—including organic chemicals—as well as environmental remediation. The company has obtained ISO 9001, ISO 14001, and other management system certifications. With a long-standing commitment to construction, innovation, and development across multiple sectors—such as chemical environmental engineering and civil architecture—the company has made significant contributions to global industrial growth and the advancement of the raw materials industry.

2020-10-22

Liaoning Qizhong Lubricant Production Co., Ltd.


In 2003, the Group invested RMB 370 million to establish the Northeast Production Base, Liaoning Qizhong Lubricant Production Co., Ltd., which covers an area of approximately 46,690 square meters. The facility includes a blending workshop of 5,520 square meters, a filling workshop of 3,840 square meters, and a raw-material storage capacity exceeding 20,000 tons. Equipped with highly automated production lines, the plant boasts an annual output of over 350,000 tons, making it one of China’s largest lubricant manufacturers. It is a specialized automotive‑lubricant producer that integrates manufacturing, research and development, sales, and customer service.

2020-10-22